Skip to main content

Rough Cut the Flat Back Portion

0:15
1:03
245.6K views

At 0:15 in

Coping inside corners

What happens here

To make the coping saw work easier, set your miter saw to approximately 15 degrees. Flip the baseboard trim piece upside down and carefully cut off the flat, back portion of the mitered end. Be sure to stop the cut just before reaching the detailed decorative profile. This rough cut removes excess material, leaving only the profile to be refined with the coping saw.

Goal: Remove excess material from the back of the trim to simplify coping.

Tools and materials

  • Marked Baseboard Trim — The piece of molding being prepared for coping
  • Miter Saw — Making the rough cut

What they say

Hide

on your second piece. It exposes the profile that we need to follow. Mark this edge with a pencil. On this trim, I can remove this flat part with the miter saw. Set the saw to 15°. Flip your trim upside down. Hold tight. Just cut the flat part. I stopped right before the detailed portion. Grab a coping saw. Make sure your teeth face towards the handle. You want to angle your saw back towards the trim and follow your line.

Auto-generated from the video audio.