Skip to main content

Install Coped Piece and Check Fit

0:44
1:03
245.6K views

At 0:44 in

Coping inside corners

What happens here

Slide the newly coped baseboard trim piece into position, allowing its coped end to nest perfectly against the profile of the square-cut piece already installed in the corner. The back-bevel will ensure that only the finished edges meet, creating a tight, seamless joint. The video demonstrates how the coped joint is forgiving, allowing for slight movement without creating gaps, unlike a mitered joint.

Goal: Achieve a tight and visually appealing fit for the baseboard corner.

Tools and materials

  • Coped Baseboard Trim — The finished piece ready for installation
  • Installed Baseboard Trim — The first piece already in place

What they say

Hide

Or you can cut the whole thing with your coping saw. You're back cutting the material behind this finished edge and that leaves the front profile able to make contact. Now, slide that piece into your square piece. Miters can absolutely work, but cope joint is more forgiving. See how far I can move this piece out from the wall and it still lines up. Square one cut, 45 the other, follow the profile, back cut with your coping saw, and then you're done. Anyways, I got stuff to do. I'll catch you guys later.

Auto-generated from the video audio.