Skip to main content

Cope the Trim Profile with a Coping Saw

0:25
1:03
245.6K views

At 0:25 in

Coping inside corners

What happens here

Secure a coping saw, ensuring its teeth are facing towards the handle for a pull-stroke cutting action. Carefully begin cutting along the pencil line that marks the trim's profile. As you cut, slightly angle the coping saw backward (away from the finished front edge of the trim). This 'back-bevel' or 'back-cut' removes material from behind the profile, allowing only the front edge of the coped piece to make contact with the square-cut piece. This creates a very tight joint that is forgiving of slight imperfections in the wall's 90-degree angle. You can either back-cut the entire profile or just the sections remaining after the miter saw rough cut.

Goal: Precisely cut and back-bevel the trim's profile for a perfect fit.

Tools and materials

  • Coping Saw — Precisely cutting along the marked profile of the baseboard trim
  • Marked Baseboard Trim — The piece of molding whose profile is being cut

What they say

Hide

Just cut the flat part. I stopped right before the detailed portion. Grab a coping saw. Make sure your teeth face towards the handle. You want to angle your saw back towards the trim and follow your line. Or you can cut the whole thing with your coping saw. You're back cutting the material behind this finished edge and that leaves the front profile able to make contact. Now, slide that piece into your square piece. Miters can absolutely work, but cope joint is more forgiving.

Auto-generated from the video audio.