Skip to main content

Explore the Type 17 Screw Tip

1:09
1:44
65.9K views

At 1:09 in

Construction screws explained

What happens here

The video introduces the Type 17 tip, a specialized design found on some construction screws. This particular tip is designed with a cutting flute, which acts like a small drill bit, creating its own pilot hole as the screw is driven. This feature greatly assists in starting the screw, making initial engagement with the material easier, and crucially, it significantly reduces the likelihood of splitting the wood, especially when driving near edges or into softwoods. A demonstration shows a Type 17 screw being driven into a piece of soft pine very close to the edge without any pre-drilling, and the wood remains un-split, showcasing the effectiveness of this tip.

Goal: Learn about the Type 17 screw tip and its anti-splitting properties.

Tools and materials

  • Construction Screw with Type 17 Tip — Demonstrating the Type 17 tip's function
  • Milwaukee Fuel Impact Driver Milwaukee — Driving the Type 17 screw for demonstration
  • Soft Pine Board — Material for demonstrating anti-splitting feature

What they say

Hide

fibers helping it drive in a lot better, also clearing the wood chips as the screw drives in. Not even all the tips are the same. This has a type 17 tip, which helps you start the screw a lot better, but also reduces the chances of you splitting the wood. These type 17 screws often don't require any pre-drilling. Right on the edge of the soft pine, no splitting. And this screw has these milling ribs on the shank, which reduces friction as you drive the screw in as

Auto-generated from the video audio.