Assemble & Install Upper Cabinets

and then we'll start building the towers i'm gonna take a cut here this is my 13 inches deep of a locker and then this comes at 21 inches so essentially this will be a corner corner cabinet i'm going to use a little bit of table saw and then finish off the cornering part with a detailed uh recipe saw that should be well not every sip song we're not demo anything scroll saw or jigsaw i can't think straight i'm sorry a little pro tip when you're using like a circular saw or anything like that on a cross cut on plywood lay down some tape on both sides therefore that will prevent the tear out and go nice and slow because this is a corner cabinet i don't like that it's going to be exposed decided i'm going to kick the top and bottom part out and just put a full filler piece in the back that way this angle will be one solid piece all that's left for cabinets at least the carcasses is the top parts [Applause] [Music] i did put a divider down the middle reason why this is too much of a span that things will start sagging down just a strong rainforest i'm going to take the top cabinets down now that i know everything fits and we're going to install the bench top that's going to go on top here i figured out what i want to