Skip to main content
Stesso

Fabricate and Assemble AN Drain Line

21:50
33:31
35.9K views

At 21:50 in

Budget Turbo Yukon XL "Uncle Rob" Oil Drain & Feed Install! (Logan's First Busted Knuckles)

Watch on YouTube

What happens here

To create the custom AN drain line, first, mock up the approximate routing of the hose from the turbo's drain outlet down to the newly installed fitting on the oil pan. Ensure there's sufficient slack to prevent rubbing and accommodate engine movement. Mark the hose at the desired cut point, then secure it in a vise. Use a reciprocating saw with a fine-tooth metal blade to carefully cut the braided hose. Once cut, gently pull back the braided outer layer and insert the AN fitting, ensuring the hose is fully seated against the fitting's shoulder.

Goal: Create the custom AN-10 drain hose assembly

Tools and materials

  • AN Wrench Set Redhorse Performance — Tightening AN fittings without scratching them
  • AN-10 Braided Hose Redhorse Performance — Constructing the oil drain line
  • Reciprocating Saw Milwaukee — Cutting the braided AN hose
  • Safety Glasses — Eye protection during cutting
  • Vise — Securing the hose for cutting
  • Work Gloves — Hand protection from sharp braided hose
  • Electrical Tape — Preventing hose fraying during cutting

What they say

Hide

it's all downhill so i'm gonna this before i mark it for good i'm gonna come up here make sure everything looks the way i want it to and it does i'll leave a little extra length so it doesn't have to rub i've got this marked with a piece of tape now we're going to pull it back out and cut it with something that is yet to be determined i don't know what i'm going to cut it with she always says this really funny stuff as soon as i shot the camera off repeat what you just said because it was noteworthy it might be kind of cool to use like a chainsaw because you haven't used any of the right tools thus far kind of overkill but it'd be funny just getting monotone roasted like i've been doing to so many people for so many years dang that'll happen you want a chainsaw this is the closest thing we got i like it all right you want to do it no you sure yep this is another horrible idea and we're just going to do it anyway here the bad ideas are always the most fun you know it imagine that it actually worked you worked pretty well beautiful i'm using that more often i tell you why that was if you guys don't like it i don't even have to say it oh i didn't film this part last time so we're gonna show it this time the part where you shove the thingy over the thingy very descriptive yeah you take your thingy take your thingy and you shove it on there is that like the scientific name it is yeah that's what it is much impressed but i wrapped the electrical tape around here on purpose and cut it through the tape to keep the fray from going like and making it impossible to shove this on you can gather up these and kind of bunch them back together to tape them up but you're going to stab your thumbs in the process been there done that it helps if you twist them you can find a socket that fits directly on here and just and use that to get it on so you don't get to beat the crap out of your hands

Auto-generated from the video audio.