Remove Old Bearing Race from Axle
11:33
32:50
184.4K views
At 11:33 in
Bringing this crusty 60 year old tractor back to life!
What happens here
The old bearing race is tightly pressed onto the axle shaft and needs to be removed. Since a standard press might not fit the entire axle, an alternative method is used. Use a die grinder to carefully cut two notches on opposite sides of the old bearing race. Then, use a hammer and a pry tool to tap the notched race off the axle shaft. This allows for removal without damaging the axle itself.
Goal: Detach the old bearing race from the axle shaft.
Tools and materials
- Die Grinder — Cutting notches in the old bearing race
- Hammer — Tapping the notched bearing race off
- Pry Tool — Aiding in the removal of the notched bearing race
- Safety Glasses — Eye protection from sparks and debris
- Work Gloves — Hand protection