Pipe Connections with Heat Gun and Fittings
18:16
29:02
37.8K views
At 18:16 in
Bit off more than I could chew with this farm water project!
What happens here
The presenter prepares to install gate valves and T-fittings for the water system. He uses stainless steel barbed fittings for all connections, which will be double-clamped with hose clamps offset by 180 degrees for maximum security. He demonstrates using a Milwaukee M18 Redlithium heat gun to soften the 1.25 inch poly pipe, making it pliable enough to easily press the barbed fittings into place. He emphasizes heating the pipe to approximately 250 degrees Fahrenheit for optimal insertion. He notes that installing these connections requires two people, making it a collaborative effort.
Goal: Connect poly pipes using heat-softened barbed fittings and double hose clamps.
Tools and materials
- Gate Valves — Controlling water flow to different sections of the system
- Hose Clamps — Securing the barbed fittings to the poly pipe
- Nut Driver — Tightening hose clamps
- Rubber Mallet — Gently tapping barbed fittings into softened pipe
- Stainless Steel Barbed Fittings — Creating secure connections between poly pipe sections
- T-fittings — Creating branch lines in the water system