Reinstall Drip Tube — Install the New Shower Diverter Valve
Part of project
Shower Diverter Installation: Switch Water Between Tub & Showerhead · Step 3 of 5
In this video
Apply Teflon tape to the male threads of the drip tube. Then, reattach the drip tube to the outlet of the newly installed T&P valve. Hand-tighten it first, then use adjustable pliers to give it a final tightening until it is secure.
Goal: Attach Drip Tube
Used in this video
- Adjustable Pliers (brand: Channellock, Pliers Type: Channel-Lock) — Tightening the drip tube onto the T&P valve.
100K subscribers
FAQs
Beyond a screwdriver and Teflon tape, what other tools or materials might I unexpectedly need for this shower diverter installation?
While a multi-screwdriver and Teflon tape are essential, it's wise to have an adjustable wrench or pliers on hand for securely tightening the new diverter. You might also find a utility knife useful for cutting away old caulk, and a flashlight to better see into tight spaces.
What should I do if I can't find the shut-off valves for my shower or entire house?
If you can't locate local shut-off valves for your shower, you'll need to turn off the main water supply to your entire house. This is typically found near your water meter or where the main water line enters your home. Always ensure the water is completely off before starting work to prevent flooding.
I've installed the new diverter, but it's leaking when I turn the water back on. What's the most common reason for this?
The most common cause for leaks after installation is insufficient tightening or improper application of Teflon tape. Ensure you've wrapped the Teflon tape clockwise around the threads 3-5 times, and gently but firmly tighten the diverter valve with a wrench or pliers until snug, without over-tightening.
Is this really a beginner-friendly project, and can I realistically complete it in 3 hours?
Yes, this project is generally beginner-friendly as it primarily involves unscrewing and screwing parts. The 3-hour estimate is reasonable for someone with basic DIY skills, but prepare for potential delays if old parts are stuck or if you need to locate a main water shut-off.
Reinstall Drip Tube — Install the New Shower Diverter Valve
Part of project
Shower Diverter Installation: Switch Water Between Tub & Showerhead · Step 3 of 5
In this video
Apply Teflon tape to the male threads of the drip tube. Then, reattach the drip tube to the outlet of the newly installed T&P valve. Hand-tighten it first, then use adjustable pliers to give it a final tightening until it is secure.
Goal: Attach Drip Tube
Used in this video
- Adjustable Pliers (brand: Channellock, Pliers Type: Channel-Lock) — Tightening the drip tube onto the T&P valve.
Frequently Asked Questions
Beyond a screwdriver and Teflon tape, what other tools or materials might I unexpectedly need for this shower diverter installation?
While a multi-screwdriver and Teflon tape are essential, it's wise to have an adjustable wrench or pliers on hand for securely tightening the new diverter. You might also find a utility knife useful for cutting away old caulk, and a flashlight to better see into tight spaces.
What should I do if I can't find the shut-off valves for my shower or entire house?
If you can't locate local shut-off valves for your shower, you'll need to turn off the main water supply to your entire house. This is typically found near your water meter or where the main water line enters your home. Always ensure the water is completely off before starting work to prevent flooding.
I've installed the new diverter, but it's leaking when I turn the water back on. What's the most common reason for this?
The most common cause for leaks after installation is insufficient tightening or improper application of Teflon tape. Ensure you've wrapped the Teflon tape clockwise around the threads 3-5 times, and gently but firmly tighten the diverter valve with a wrench or pliers until snug, without over-tightening.
Is this really a beginner-friendly project, and can I realistically complete it in 3 hours?
Yes, this project is generally beginner-friendly as it primarily involves unscrewing and screwing parts. The 3-hour estimate is reasonable for someone with basic DIY skills, but prepare for potential delays if old parts are stuck or if you need to locate a main water shut-off.