Remove the Impellers and Diffusers — Reassemble the Shower Trim
Part of project
Shower Diverter Installation: Switch Water Between Tub & Showerhead · Step 4 of 5
In this video
Carefully remove the impellers and diffusers one by one, checking each for any cracks or damage. Note the order in which they are removed for correct reassembly.
Goal: Inspect and remove individual impellers and diffusers
- Pay attention to the orientation of each impeller and diffuser.
100K subscribers
FAQs
Beyond a screwdriver and Teflon tape, what other tools or materials might I unexpectedly need for this shower diverter installation?
While a multi-screwdriver and Teflon tape are essential, it's wise to have an adjustable wrench or pliers on hand for securely tightening the new diverter. You might also find a utility knife useful for cutting away old caulk, and a flashlight to better see into tight spaces.
What should I do if I can't find the shut-off valves for my shower or entire house?
If you can't locate local shut-off valves for your shower, you'll need to turn off the main water supply to your entire house. This is typically found near your water meter or where the main water line enters your home. Always ensure the water is completely off before starting work to prevent flooding.
I've installed the new diverter, but it's leaking when I turn the water back on. What's the most common reason for this?
The most common cause for leaks after installation is insufficient tightening or improper application of Teflon tape. Ensure you've wrapped the Teflon tape clockwise around the threads 3-5 times, and gently but firmly tighten the diverter valve with a wrench or pliers until snug, without over-tightening.
Is this really a beginner-friendly project, and can I realistically complete it in 3 hours?
Yes, this project is generally beginner-friendly as it primarily involves unscrewing and screwing parts. The 3-hour estimate is reasonable for someone with basic DIY skills, but prepare for potential delays if old parts are stuck or if you need to locate a main water shut-off.
TranscriptHide
Auto-generated transcript. May contain errors.
Remove the Impellers and Diffusers — Reassemble the Shower Trim
Part of project
Shower Diverter Installation: Switch Water Between Tub & Showerhead · Step 4 of 5
In this video
Carefully remove the impellers and diffusers one by one, checking each for any cracks or damage. Note the order in which they are removed for correct reassembly.
Goal: Inspect and remove individual impellers and diffusers
- Pay attention to the orientation of each impeller and diffuser.
Frequently Asked Questions
Beyond a screwdriver and Teflon tape, what other tools or materials might I unexpectedly need for this shower diverter installation?
While a multi-screwdriver and Teflon tape are essential, it's wise to have an adjustable wrench or pliers on hand for securely tightening the new diverter. You might also find a utility knife useful for cutting away old caulk, and a flashlight to better see into tight spaces.
What should I do if I can't find the shut-off valves for my shower or entire house?
If you can't locate local shut-off valves for your shower, you'll need to turn off the main water supply to your entire house. This is typically found near your water meter or where the main water line enters your home. Always ensure the water is completely off before starting work to prevent flooding.
I've installed the new diverter, but it's leaking when I turn the water back on. What's the most common reason for this?
The most common cause for leaks after installation is insufficient tightening or improper application of Teflon tape. Ensure you've wrapped the Teflon tape clockwise around the threads 3-5 times, and gently but firmly tighten the diverter valve with a wrench or pliers until snug, without over-tightening.
Is this really a beginner-friendly project, and can I realistically complete it in 3 hours?
Yes, this project is generally beginner-friendly as it primarily involves unscrewing and screwing parts. The 3-hour estimate is reasonable for someone with basic DIY skills, but prepare for potential delays if old parts are stuck or if you need to locate a main water shut-off.
Video Transcript
(2,122 characters)Hide
Video Transcript
(2,122 characters)Transcript may be auto-generated and contain errors.