Skip to main content
Stesso
Project

Install the New Showerhead — Install the New Delta Shower Head

Beginner45 mins

Part of project

Delta Shower Head Installation: A Step-by-Step Guide · Step 4 of 5

Helpful?

In this video

Screw the new showerhead onto the tape-wrapped threads of the shower arm by turning it clockwise. Hand-tighten it as much as you can. Then, use the crescent wrench to give it a final quarter-turn to snug it up. Be careful not to over-tighten, as this can damage the new fixture's plastic connector.

Goal: Attach and tighten the new showerhead

  • Do not over-tighten the showerhead. Hand-tight plus a small turn with a wrench is sufficient. Over-tightening can crack the connector.
  • If you are concerned about scratching the new showerhead's finish, place a rag between the wrench and the fixture.

Used in this video

  • Adjustable Crescent Wrench (brand: Unspecified) — Giving the new showerhead a final tightening turn.
37.7K views5132 minutes
Lowe's Home Improvement

1.3M subscribers

View Channel

FAQs

What specific tools and materials are essential for installing a Delta shower head, besides the new head itself?

You'll definitely need an adjustable wrench to remove the old head and tighten the new one. Crucially, have Teflon tape on hand for a watertight seal, and a soft cloth (like a microfiber cleaning cloth) to protect the finish of your new Delta shower head when using the wrench.

What is the most important safety precaution to take before beginning to replace my Delta shower head?

The absolute most critical step is to turn off the main water supply to your shower or, if possible, to your entire home. This prevents unexpected water sprays or potential flooding once you start removing the old shower head from the arm.

My newly installed Delta shower head is leaking around the connection point. What's the first thing I should check?

A leak usually indicates an issue with the seal. First, ensure you applied enough Teflon tape (typically 3-5 wraps clockwise) and that it's seated properly. Then, gently tighten the connection further with your adjustable wrench, making sure to protect the finish with a cloth.

The project mentions 45 minutes for a beginner. Is this realistic for someone who has never installed a shower head before?

Yes, 45 minutes is a realistic estimate for a beginner, assuming you have all your tools ready and follow the steps. Most of the time is spent carefully removing the old head and ensuring a good, leak-free seal with the new one. Don't rush applying the Teflon tape.

Transcript
Hide

Then put the shower head on and hand tighten it as much as possible Then you can leave it like that or you can tighten it down a little bit more with a wrench If you want to be extra careful you can use a rag around the shower head while you're tightening it Just to make sure you don't damage anything and make sure you don't over tighten it or you will damage it And that's it you've got a new shower head in place

Auto-generated transcript. May contain errors.