Testing and Final Adjustments of the System
At 14:15 in
You've never seen a farm water system like this...cheap, easy no electrical required!
What happens here
With the ram pump successfully operating, check the water flow at the hydrant in the upper pasture. Observe that water is now flowing, demonstrating the ram pump's ability to pump water uphill without external power. The pressure gauge reads approximately 48-50 PSI. Although the flow rate is a trickle (about 0.75 to 1 gallon per minute), it is sufficient to maintain water levels in livestock troughs. For continuous watering, a float valve can be installed in the trough to automatically open and close as water levels change. Alternatively, an overflow valve can be used to return excess water back to the creek, ensuring no water is wasted and the watershed remains unaffected.
Goal: Verify water delivery and pressure at the hydrant, making final adjustments for continuous operation.
Tools and materials
- Float Valve — Automatically controlling water flow into a trough
- Hydrant — Water dispensing point in the upper pasture
- Livestock Trough — Holding water for cattle
- Pressure Gauge — Measuring water pressure in the delivery line