Apply First Coat of Wipe-On Poly

What happens here

Ensure the wood surface is completely clean and free of dust before applying any finish. Apply the first coat of Minwax Wipe-On Poly (Clear Satin) using a lint-free old t-shirt or rag. Pour a generous amount directly onto the wood slab and spread it evenly across the entire surface, including the edges. The wipe-on poly will immediately bring out the natural colors and grain of the ash wood. Allow this first coat to dry completely for about 3 hours in a shaded, well-ventilated area to prevent direct sunlight exposure, which can affect drying and curing.

Goal: Apply the initial protective and enhancing finish to the wood slab.