Install Internal Plumbing and Filtration System

our steps and cover are done the freezer is ready let's start working on the plumbing so there's a slight problem here I got these little watertight fittings that are meant to thread anything else you want on it which I used on the coal plunge but the problem is is this is too thick for it to grab onto if you're using a horse trough they're pretty thin steel so you could get it on perfectly here I can't so the solution that I found since it's steel or aluminum whatever probably Steel on the outside and steel on the inside what I'm going to do is I'm going to cut out maybe almost like a utility box to the front take the insulation of the front out and then just leave the steel plate in the back there so this thing can actually grab onto something and it won't look as pretty but I can't find these to be any longer really I dang I had no idea how many these copper pipes are running through there's really actually I don't think a way to drill through without hitting one unless you have one of those thermal scanners so you can actually see the grid but dang they're all over the place there's one two there's one uh three coming down here and I'm sure the next one's going up there so it's probably this crazy grid light pattern we're going to start throwing these on it's got a gasket on the inside bolting these on and the cool thing about these they have thread so you can thread a pump like we will or you could thread any connector through it I'm going to throw a bead of 100% silicone around it just to make sure we have a double protection here we don't want any surprises later down the road uh This Is My Water getting poured out this one's going to be my water getting sucked in these chillers don't don't have a pump built in they they only stay stagnant until you add a a pump to it so this one I've had for a long time you can get these for fountains water featur stuff like that so I'm going to thread this on ahead of time and then feed it through and then tighten the nut from the other side Mak are really hard to tighten I needed a few more inches of my arms all right this is our water drainage which in hindsight I don't know why I need it since my pump is sitting so low well actually I do need it because it'll be culating through the bottom so yeah this is our drainage okay so here's how our filtration system is going to work uh I think I have three levels of filtration uh first level is we have an ozonator here so it does something with the ozone layer I know…