Drill Plumbing Holes and Waterproof Interior

we got probably another hour of the Bondo to dry so while I'm not wasting time I'm going to start working on creating a liquid tight environment in here most freezers already have silicone and cocked Corners this one does for sure if yours doesn't make sure you do it uh but what I'm going to do is I'm going to drill my drain holes pump holes all the holes that I need for the plumbing because I don't want to have debris in there I'm going to then apply some flexia liquid to make sure there's an added layer of protection of creating a liquid typ environment in here that nothing leaks towards my electronics or [Music] anything I just punctured the freon this is officially just nothing but a chest cavity I should get back you don't want to be breathing that stuff so I don't know if you could see it but there's a little tube that looks like a copper tube that I cut right through and that just let all the freon escape and I think the way these are set up is that these tubes are running like coils all the way through this instulation material so I mean unless you have a way of detecting them which I don't uh you're going to run into problems like this