Inject LiquiTube Sealant

0:44

1:10

44.7K views

At 0:44 in

That went bad fast. But got fixed, even faster. #diy #tires #emergency #repair #shorts

Watch on YouTube

What happens here

With the pump securely connected, open the valve on the pump's hose to allow the LiquiTube sealant to flow. Begin operating the pump handle to inject the sealant from its 5-gallon pail into the tire. The presenter notes that this specific pump is designed to overcome pressures of over 50 PSI, meaning it's often not necessary to fully deflate the tire before injection. Continue pumping until the recommended amount of sealant for your tire size and type has been transferred.

Goal: Transfer the correct amount of LiquiTube sealant into the tire.

Tools and materials

Specialized LiquiTube Pump LIQUITUBE — Pumping the sealant
LiquiTube LIQUITUBE — Providing tire puncture protection

What they say

(552 characters)

Hide

core removers with all of our 5-gallon pumps. But, you pull the valve core out of whatever tire you're going to treat, and you clip this on. You open it to the open position, and then you pump in whatever the applicable amount is. This pump will override 50 lbs of pressure, too, so you don't have to let all of the air out of the tire to squeeze. And that's as simple as that. And you put your valve core back in. >> run the machine, you got a tire that's protected for the life of the tire. Where do you guys find out more information on these?

Auto-generated from the video audio.