Complete Installation and Re-inflate Tire

0:54

1:10

44.7K views

At 0:54 in

That went bad fast. But got fixed, even faster. #diy #tires #emergency #repair #shorts

Watch on YouTube

What happens here

Once the appropriate amount of LiquiTube sealant has been injected, close the valve on the pump's hose, then disconnect the hose from the tire's valve stem. Immediately re-insert and screw the valve core back into the valve stem using the valve core remover tool, ensuring it is tightened securely to prevent air leaks. Finally, inflate the tire to its manufacturer-recommended pressure. With the LiquiTube installed, the tire is now protected for its entire lifespan.

Goal: Re-seal the tire and ensure long-term puncture protection.

Tools and materials

Air Pump — Re-inflating the tire to its recommended pressure
Valve Core Remover Tool LIQUITUBE — Re-inserting and tightening the valve core

What they say

(488 characters)

Hide

You open it to the open position, and then you pump in whatever the applicable amount is. This pump will override 50 lbs of pressure, too, so you don't have to let all of the air out of the tire to squeeze. And that's as simple as that. And you put your valve core back in. >> run the machine, you got a tire that's protected for the life of the tire. Where do you guys find out more information on these? >> You go to liquitube.com. LiquiTube .com. All right. Thank you, sir.

Auto-generated from the video audio.