Skip to main content
Stesso

That took less than 30 seconds. #tools #construction #metal #diy #shorts

0:54
29.9K views

Video by Stanley "Dirt Monkey" Genadek

Stanley "Dirt Monkey" Genadek

Watch on YouTube

What happens here

This project demonstrates the high-speed and efficient method of drilling precise holes in thick materials, specifically 1-inch thick metal, using a specialized carbide tungsten tip hole cutter. The process showcases the tool's ability to quickly cut a 3/4-inch hole, emphasizing its unique design which only cuts the circumference of the hole, drastically reducing drilling time compared to conventional methods. The demonstration also highlights the tool's integrated spring-loaded bit that automatically ejects the cut slug.

Transcript

Hide

John, what are we looking at with this one now? >> That's our carbide tungsten tip hole cutter. Drills through 1-in thick material. The spring-loaded bit in the middle ejects the slug. >> So, this is what this is what the end looks like right here. >> So, if you notice, that was a 3/4-in hole that I did in less than 30 seconds. >> Is that typical for this drill bit? >> Yes. >> Why does it work so fast? >> Because you're only cutting the circumference. You're not cutting the entire middle part of the tool. >> All right. Where do guys find out more information? >> Rodman drill.com. >> All right. Thank you, sir. >> Thank you, sir.

Auto-generated from the video audio.