Speedbinder Demonstration & Usage Instructions

3:31

22:15

78.2K views

At 3:31 in

Stranded on the road 100's of miles from home.

Watch on YouTube

What happens here

The driver proceeds to demonstrate the functionality of the Speedbinders. He attaches a 3/8-inch adapter with a 14mm socket to the DeWalt impact driver (specifically the DCD 991P2 model, as recommended by Speedbinders). He then uses the impact driver to quickly tighten and loosen the Speedbinders, showcasing their efficiency. He emphasizes the importance of following the manufacturer's recommended clutch settings (5, 6, or 7) on the drill to prevent damaging the equipment or vehicle. He also points out the manual tightening option in case the impact driver's battery dies, ensuring versatility and reliability in the field.

Goal: Demonstrate proper and safe operation of Speedbinders.

Tools and materials

14mm Socket — Fitting onto the Speedbinder's tightening mechanism
3/8-inch Adapter — Connecting the socket to the impact driver
Battery Charger DeWalt — Charging the impact driver batteries
DeWalt DCK299P2 Impact Driver DeWalt — Powering the Speedbinders for quick tightening/loosening
Speedbinders — Demonstrating load securement
Grease — Lubricating the end links of the Speedbinders

What they say

(2,457 characters)

Hide

i didn't expect it to send an impact i'll gladly take it i guess they didn't know that i had a couple of these that was very nice of them to send it well look what happens when you read something all right get a load of this this is what i'm going to read you guys this is why they sent that to me uh torque drive binders have been designed to be used with the dewalt dcd-991 p2 drill so this exact model the binders will work with most 18 or 20 volt drills however the best performance in speed chain tightening and number of cycles will be achieved by using the dewalt dcd 991 p2 drill that means i got to get that charged up and going okay you will need a simple 3 8 inch adapter with a 14 mil socket put the clutch on setting five six or seven seven is very tight and intended for three eighths grade or 70 transport chain oh they got this dialed in with this setting and above it is possible to damage your vehicle oh holy crap exercise caution when you use these binders and with practice you will find the setting that works best for you and your equipment dang what do you think gracie are you good with that okay this gracie approve i think i'm gonna crawl into the refrigerator pretty soon there might be enough space if i take out all the spin drift but i got a fresh pack okay so knowing they want me to use this drill crack this open but we want to make sure we get the best performance we really show how this what this thing can do and it sounds like these guys have this dial in for this drill although i was just gonna use this one right here or whatever one i had available and then i read them instructions all right let's get these to charging so we can use these okay so just to clarify the remaining two pieces to the puzzle are right here this adapter and this socket in your impact all right well now in full disclosure you guys speed binders sent me these i didn't pay them for them they sent them to give me a chance to try them out and in reality to give you guys a chance to try them out because when i get something cool like this i tend to try to share it good bad in between here's a beautiful thing about when i work with companies like these guys yes i tell them up front you could send me your stuff but you can't tell me what to say about it if i like it i'm going to say that if i don't like it i'm going to say that it's just the way it is i don't want you guys getting stuck with something that may be less than perfect

Auto-generated from the video audio.