Restore Water Supply and Test Flush

that's locked in place so let's take our supply line let's get that cranked on i'm gonna reach back over here on the other side and we'll slowly turn the water back on so to achieve the maximum flush let me show you what i had to do this thing tricky ricky really there's a lot to this flapper something i didn't even realize from before is that you can actually spin this piece right here and you can get that hole and for something like this this older style toilet you're gonna want that hole like i want it to flush the top half of the toilet and so i actually had to use a pair of channel locks to get this over because i couldn't get it to move but reading the instructions i knew there was this little hole here or at least it could be achieved so i just had to spin it with my channel locks and then i ended up setting this to four okay so you just gotta play with it and you gotta constantly tweak it once you get your water height then you're gonna be good to go this little knob right here also helps set your your bowl height but it also helps with the splash so i actually just took the splash away i think that the height is good enough and man you're really just gonna have to play with this for your particular toilet let's get her filled back up and i'll show you the flush i think that's about as good as we're gonna get all right let's just get down here we'll look everywhere for leaks so you can't even tell there are any shims there until you get down underneath it and behind it but everything is good there are no leaks we're good to rock and roll here