Adjust Overflow Tube and Flapper Chain

we don't really have a lot of movement which is awesome it's very sturdy so the bottom of this is about nine and a half so let's just take this overflow tube to about eight and a half was pretty close boom right there and we tighten that up now that that's hooked up let's go ahead and let's just adjust our chain real quick let's get this all situated and set up i'm going to end up going to the middle hole with this chain and then you want a little bit of a dangle in it right you don't want it to be taut you want just a little bit this adjustment is going to vary right it's really going to depend on your handle i'll usually leave three or four links on it just take one side of this and you can just clamp one of these down and then remove that now we want to adjust our