Install Conduit Bushing and Meter Cover

What happens here

Before the meter pan can be closed, a protective bushing needs to be placed on the end of the conduit where the service wires enter the pan. This bushing prevents the sharp edges of the conduit from abrading the wire insulation over time. Once the bushing is in place, the meter cover, which typically has an opening for the utility meter, is placed over the meter pan opening and pushed down to securely fit into the designated spot. The actual utility meter installation is performed by the utility company, not by the homeowner or electrician on site during this repair.

Goal: Complete conduit protection and close the meter pan.