Skip to main content
Stesso

Introduction and Problem Diagnosis

0:01
3:31
56.9K views

At 0:01 in

Replacing a Titan 440 Pump Filter. Repairing a Titan airless sprayer.

Watch on YouTube

What happens here

The video begins with an introduction to the problem: a Titan 440i paint sprayer is 'spitting' during operation. The presenter explains that this issue is often related to pressure problems caused by clogged filters. He points out that there are two main filters to check on this unit: the pump filter and the gun filter. This video will focus on replacing the pump filter, which is located on the main body of the sprayer.

Goal: Understand the cause of paint sprayer spitting and identify the pump filter location.

Tools and materials

  • Titan 440i Paint Sprayer Titan — The main equipment for which the filter is being replaced

What they say

Hide

This is Chris, the Idaho Planner, with another quick and simple tip. Replacing the the filter housing on a Tit Titan 440 that's been related to some pressure issues in the gun spitting. This is Chris, the Idaho Painter, coming to you with another quick tip, and that's using a Titan 440i. Today, we've been using this pump. We've been getting a little bit of spits with the gun, and sometimes the spits could be related to a pressure issue and not getting enough pressure to the gun itself. And on this unit, we got a Titan 440. There's an actual gun filter and then there's also a filter inside the pump and that sometimes can be related to your pressure. If those filters get clogged, you cannot get enough pressure to your gun which will cause spits. So, I've got another video discussing spits. This one is going to be related to changing your filters. And

Auto-generated from the video audio.