Skip to main content
Stesso

Install New Pump Filter and Reassemble Housing

1:59
3:31
56.9K views

At 1:59 in

Replacing a Titan 440 Pump Filter. Repairing a Titan airless sprayer.

Watch on YouTube

What happens here

Take a new pump filter, ensuring it is the correct type and mesh for your Titan 440i sprayer. Insert the new filter into the pump's manifold. To tighten the new filter, screw it in counter-clockwise until it is snug. Reattach the pump filter housing, screwing it back in clockwise with your hand until it is finger-tight, then use the wrench to tighten it securely but without overtightening. The presenter reminds to add more packing lube to the pump when the entire process is complete.

Goal: Replace the old pump filter with a new one and secure the filter housing.

Tools and materials

  • New Pump Filter — Replacing the old, clogged filter
  • Titan 440i Airless Paint Sprayer Titan — The equipment being serviced
  • Wrench — Tightening the pump filter housing
  • Packing Lube — Lubricating the pump's internal components after maintenance

What they say

Hide

exact same color, same type of filter. We're going to screw that filter in and then put our pump back together and see if that's related to our pressure issue. That's it. We got a ourselves a new filter. We're going to be putting in a finer mesh filter in this in this manifold here. So, we're going to screw it in. You're going to be screwing it counterclockwise to tighten it. I'm going to tilt it upside down. Turn on the water the gun. Make sure it's functioning. Now I'm going to screw the filter housing back in. The filter housing tightens going clockwise.

Auto-generated from the video audio.