Skip to main content

Perform Final Leak Check and Note Overflow Risk

4:19
5:30
22.7K views

At 4:19 in

Repair Your Slow Draining Bathroom Sink In Easy Steps!

What happens here

As a final precaution against hidden leaks, place a dry paper towel directly on the cabinet floor underneath all P-trap connections. Leave it there for at least a day or two. This will absorb any slow drips that might not have been immediately visible during the initial water test, indicating a minor leak that needs to be addressed by re-tightening connections. The presenter also highlights the absence of an overflow hole in many modern vanities. This means that if the drain ever clogs again while the faucet is running, the sink will overflow onto the floor, potentially causing severe water damage.

Goal: Detect any hidden leaks and be aware of overflow potential

Tools and materials

  • Paper towel — Detecting slow leaks under the sink

What they say

Hide

everywhere there hey looking good so you want to be careful when you're filling and testing vanities like this notice there's no overflow hole right here all right that can lead to a major issue if you walk away while you're filling this up and draining it you could have a major flood going on all right or if you think you're leaving your sink running and it ends up being stopped up well walk away and see what happens you're going to come back to a flood scenario not good everything is good to go back to normal here last thing I like to do take some paper towel stick it right down below there and then come back and check it in a day or two don't put anything back come back and check it it and if you see a leak well then we know that we got to address it sometimes it takes a little bit for one to form okay

Auto-generated from the video audio.