Skip to main content
Stesso

Clean the P-Trap Components and Wall Drain

2:09
5:30
22.7K views

At 2:09 in

Repair Your Slow Draining Bathroom Sink In Easy Steps!

Watch on YouTube

What happens here

With the P-trap and pop-up stopper removed, thoroughly clean both the internal surfaces of the P-trap components and the exposed stub of the drain pipe coming from the wall. Use a flathead screwdriver or similar tool to scrape out all accumulated sludge, hair, and grime. Ensure that the pipes are completely clear of any blockages. The goal is to restore the full diameter of the pipes for unrestricted water flow.

Goal: Remove all blockages from the P-trap and associated pipes

Tools and materials

  • Gloves — Protecting hands from grime, Screwdriver Unknown

What they say

Hide

clean that out you can't even see to the bottom it's open you can't see nothing completely clogged grab a little paper towel stick that down in through here so as I start pushing that down it's just cleaning the pipe and we're going to get it all cleaned out we'll grab a screwdriver to finish oh gosh that is just looks like a turd that does not look pretty dudes now we got to do the same thing for this bad boy now we're looking all nice and clear looks good some nasty parts to Home

Auto-generated from the video audio.