Skip to main content
Stesso

Understand Purpose and Gather Tools

0:01
2:21
127.1K views

At 0:01 in

Remove & Install Door Weatherstrips. House weather stripping hacks.

Watch on YouTube

What happens here

The video introduces the process of removing weather strips from doors, primarily for painting projects where you want to avoid getting paint on the strips. It also highlights replacing damaged strips (e.g., from pets) or previously painted ones as a common DIY project. The presenter recommends using a painter's 5-in-1 tool or any flat tool like a screwdriver for removal. He mentions that replacement weather strips are inexpensive (around $5 per piece or $15 for a whole door set at Home Depot) and are easily removable and reinstallable, often just by hand for reinstallation.

Goal: Prepare for weather strip removal and replacement

Tools and materials

  • Flat-head screwdriver — Prying and removing weather strips (alternative to 5-in-1), Painter's 5-in-1 Tool Unknown
  • Replacement weather strips — Replacing old or damaged strips

What they say

Hide

painter. In this video, we're going to show you how we remove the weather strips on a door. And typically, we got doors that we're going to be painting. We don't want to paint the weather strips, so we remove them. And a simple tool just to remove them with is a painters 5 in one. Or you could use any type of flat tool like a screwdriver. And this is a good do-it-yourself project. If you've got weather strips that have been previously painted by uh some painters or been damaged by a dog chewing them up or a cat chewing them up, you can replace them simply. Home Depot sells them for about $5 a piece. You can get a whole set of them for a door for no more than $15. And they're easily removable and easily reinstallable. And you remove them. You don't even have to have a tool, but sometimes a flat tool will work to remove put them back in. You don't even have a have a tool to put them back in. They just push in with your hands. So, I'll show you how you quickly remove them, and then I'll show you how you

Auto-generated from the video audio.