Skip to main content
Stesso

Relocate to Shaded Area and Mask Hardware

3:50
9:01
103.9K views

At 3:50 in

Refinishing A Front Door. Clear Coating A Door With Urethane.

Watch on YouTube

What happens here

It is essential to apply clear coat in a shaded area to prevent premature drying or uneven application, especially if the outdoor temperature is warm. Move the door (still on its supports) into a garage or another sheltered space. Lay down drop cloths to protect the floor from overspray. Mask off all door hardware, such as handles, hinges, and any decorative elements, using high-quality painter's tape (like FrogTape) and masking paper. This prevents unwanted clear coat from adhering to the hardware. Avoid removing old, complex hardware if only clear coating, as reinstallation can be problematic or cause damage.

Goal: Move the door to a shaded, dust-free environment for coating and carefully mask off all hardware to prevent overspray.

Tools and materials

  • 9-inch masking paper
  • Drop cloths
  • Exterior door
  • FrogTape

What they say

Hide

it into the garage. Garage. Now, I'm going to mask it off. put some drop cloth down underneath it. Uh I'm going to wrap masking around the side so I don't get any overspray on the opposite side. I'm going to leave the hardware on cuz all we're actually doing is clear coating this door. If we were staining it, we would have restain it. We'd actually remove the hardware, but we don't like to remove the hardware because if it's old hardware and it has a problem going back together or you could scratch the door. There's a lot of things that actually can go wrong with removing the hardware and trying to reinstall it with some complicated hardware like this. Hardware like this. So, we're just going to mask off the hardware, which is really simple, with frog tape and 9in paper, and then clear coat it. [Music] [Applause] [Music] [Applause] [Music]

Auto-generated from the video audio.