Skip to main content
Stesso

Mount Control Unit

4:56
6:29
2.1K views

At 4:56 in

Quick Fix For Washing Machine Hose Floods!

Watch on YouTube

What happens here

To mount the FloodWatch control unit, first measure the distance between the two keyhole slots on the back of the unit (approximately 2 7/8 inches). Using a pencil, mark two corresponding points on the side of a nearby cabinet or wall. Drill small pilot holes at these marks. Then, screw the provided mounting screws into the pilot holes, leaving a small gap for the control unit to hang. Finally, align the keyhole slots with the screws and slide the control unit into place.

Goal: Securely attach the control unit to a surface

Tools and materials

  • Drill — Drilling pilot holes
  • Pencil — Marking drill points
  • Screws and Wall Anchors — Securing the control unit to the wall/cabinet
  • Tape Measure — Measuring screw spacing

What they say

Hide

that back there with the alarm and stuff we're actually not gonna put in the drywall we're gonna take it around and we're gonna stick it right on the side of this cabinet we're gonna flip the plus up around we're gonna look at this we're gonna measure we're going to go so we're going to go 2 and 7/8 across

Auto-generated from the video audio.