Skip to main content
Stesso

Connect Wires and Power Up System

5:23
6:29
2.1K views

At 5:23 in

Quick Fix For Washing Machine Hose Floods!

Watch on YouTube

What happens here

Plug the male connector from the solenoid valves into the appropriate port on the bottom of the FloodWatch control unit. Then, plug the power supply adapter into the designated power port on the control unit and into a nearby electrical outlet. Finally, organize the excess wiring by tucking it neatly behind the control unit or securing it to the wall/cabinet to keep the area tidy and prevent accidental disconnections. Once plugged in, the green light on the control unit should illuminate, indicating the system is powered on and ready. Test the system by pressing the 'TEST' button on the control unit to confirm the alarm sounds and red indicator lights activate.

Goal: Fully connect and power the FloodStop system

Tools and materials

  • Power Supply Adapter OnSite PRO Inc — Providing power to the system
  • Solenoid Valve Cables OnSite PRO Inc — Connecting valves to the control unit
  • Water Sensor Cable OnSite PRO Inc — Connecting sensor to the control unit

What they say

Hide

hooked out okay so then we're just gonna take this plug in and just plug it right into the bottom here then we're just gonna come right around here or and put that in place you can see the green light is came on so we'll just hit the test button the last thing we're going to do is we're going to take some cords and we're gonna kind of get them a little bit nicer than what they are right now because this is a little bit crazy

Auto-generated from the video audio.