Reassemble Valve Components
2:19
3:27
59.6K views
At 2:19 in
Quick Fix For Shower Not Getting Hot!
What happens here
After adjusting the temperature limit ring, reassemble the components in reverse order. First, snap the two white plastic pieces of the temperature limit ring back together. Place the assembled temperature limit ring back onto the valve. Next, put the black plastic temperature limit stop back into position and secure it by screwing in the Phillips head screw, ensuring it is tightened securely. Finally, slide the shower handle back onto the valve stem and tighten its set screw using the 7/64 inch Allen wrench until it is snug.
Goal: Put all components back together correctly.
Tools and materials
- 7/64 inch Allen wrench Elkind — Tightening the set screw on the shower handle
- Phillips head screwdriver — Securing the black temperature limit stop