Prepare New Faucet & Apply Sealant

we'll grab all this stuff out we're gonna need that different kind of weight and just pull out the faucet bag up this is going to be the seal right here kind of styrofoam foamish type of seal and it just splits in two and that's what's actually going to seal this down when this pinch is closed it's going to make a watertight seal we're not going to need these because that goes to the three hole so just want to grab this delta makes their own tool to put their faucet on it's awesome and this is their own little aerator tool this nut right here is what's actually gonna hold this faucet on so you take this bad boy right here and let's just start right here bottom of the faucet let's just rip this right off here this tab let's rip it off you don't need it you don't have to rip the paper off yet we'll just put this right here get it up to the faucet to right about there and then you can see this is just going to sit right there so what you want to do then is you just want to take this piece of paper off of here and you can just rip it it's going to come right off take this very gently kind of set it down in that groove and it's going to be hooked up so now if you want to be on the safe side you want to know 100 this is going to seal and no water is actually going to get down in there it says that you can just use some silicone and go around that and that's typically what i like to do if the manufacturer is recommending it then that is usually how i roll