Connect Hoses & Final Adjustments

tight okay so now you have these two pieces right here this one's for your pull down and this one is going to the faucet what you're going to do is you're going to take the one for the pull down you're going to slide the weight the weight's a slide weight and you're just going to slide that on there loop this around and you're just going to put those two things together just push them until they stop all right then you're able to take this little retaining clip here and it goes right in between both sides of this you can kind of feel and see where it goes and then just pops right in place what i like to do is i like to at this point pull your pull down down i like to see where it's actually going to hang and i want to make sure that i keep my lines out of the way you got two lines here with the delta you got a cold and you got a hot right it's actually going to be red and blue so very tight quarters but if you can loop this around and get the loop back out of the way we can hold this back here while tightening this it should stay and then be in a good position man you can see the build up and the dishwasher drain line that thing is a little funky monkey so we're going to do the same thing with this one and we're going to bring the loop to the back side and just plug that right in and that's going to be great you can get about a a turn a turn and a half from hand tight you're sitting pretty good okay so now you can see we've got these lines out of our way and we've got our hanging weight there's nothing interrupting this this thing is going to be able to slide let me show you all right and that's moving side to side while sliding no hang ups so then we'll turn the valves on all right so i like to go ahead and pop this head off right and just go ahead and you push this button down right here hold that down and that's going to take this out make sure you hold on to this because you got a weight on the bottom right but i don't like to get any kind of debris started off in here okay run it both hot and cold okay pop that back on you can hear it clicking eventually it just stops you're good to go testing it's got that cool little glass cleaning feature get that the whole way there look at that pretty cool