Skip to main content
Stesso

Execute Initial Routing Pass

0:37
1:00
6.6K views

At 0:37 in

Pattern router bit

Watch on YouTube

What happens here

Engage the router by turning it on, then carefully plunge the bit into the workpiece. Guide the router along the template, allowing the pattern bit's bearing to ride against the template's edge. This first pass removes a shallow layer of material, establishing the shape's outline. Maintain a consistent feed rate and firm grip on the router for a smooth cut.

Goal: Begin cutting the shape using the template.

Tools and materials

  • DeWalt Plunge Router DeWalt — Cutting the initial depth of the shape
  • Plywood — The material being cut by the router, with the template serving as a guide

What they say

Hide

want. Anyways, let's get this chucked up and see how it goes. All right. Now, you could either drill a hole here to start or you can plunge. We're just going to plunge so you guys can see how the plunge router works. Safety first, and let's get after it. All right. Now that we did our first pass, we're going to plunge a little bit deeper. Go ahead and plunge a third time and finish this up.

Auto-generated from the video audio.