Apply Peel Bond Primer to All Prepared Surfaces

What happens here

After all scraping, sanding, and wire brushing are complete, the crucial priming step begins. The presenter uses a 3-inch brush to apply a liberal coat of XIM Peel Bond latex-based primer to all areas of bare wood, compromised siding, and where blistering paint was removed. He emphasizes applying two coats to these prepped areas, noting that the primer dries quickly, allowing for rapid reapplication. The purpose of this double-coat application is to ensure maximum adhesion for the final topcoat, preventing future peeling. The presenter also mentions that after the primer dries, the surfaces are 'back-brushed' to work the primer into the texture and minimize brush strokes, preparing the surface for the final spray application of paint.

Goal: Apply two coats of Peel Bond primer to all prepared surfaces for optimal paint adhesion