Skip to main content

Prepare the First Room

1:41
14:11
223K views

At 1:41 in

Painting 3 ROOMS IN 3 HOURS. Painting fast and making money. Paint a room in 30 minutes.

What happens here

Begin the preparation process in the first room. Lay down drop cloths to cover the floor. Remove all switch plates and window blinds. Use a hand masker with 1-inch tape to mask around window frames, door frames, and along the baseboards to prevent paint splatter. Additionally, run 9-inch paper tape around the base of the walls to prevent paint from splattering on the floor. Identify and spackle any holes or imperfections in the walls.

Goal: Complete all necessary masking, protection, and surface repair in the first room.

Tools and materials

  • 1-inch Tape — Masking edges
  • 9-inch Paper Tape — Protecting floors from splatter
  • Drop Cloths — Protecting floors
  • Hand Masker — Applying masking tape
  • Spackle Knife — Applying spackling
  • Quick Dry Spackling — Filling holes and imperfections

What they say

Hide

You can check it out. So, here we go. So, we're starting. I'm running around doing our nice paper tape. We got John's removing blind. We got the wines in here. Got Zach. He's starting to run the 1 in tape and Greg is actually taking switch plates off. Got great here's running switch plates, pulling them off. We have Zach over here. He's starting to run 1 in tape. John is actually pulling the blinds. We've got blinds on our windows that got to come off. We're pulling them and labeling them. [Music] [Applause] [Music] So, we're just moving right along. It's been probably about 5 minutes. Who's got What time is it? Anybody got time? 1259 159 11 1159 [Music] the floor is covered right here. I've got my 18-in roller. I'm going to start rolling the walls. Got to get some paint on these walls fast. And I've got the GoPro cam here. So, we're going to show you what it looks like from the point of view of the roller. So, here's GoPro cam all set up right here. Ready to go. We got to ceilings in this room. Ceilings and the walls. There's some holes in the walls and John's actually running around spackling the holes. We got some, you know, nail holes and just a little bit of spackling too. So, he's hitting that getting GoPro just a GoPro panel right here. So, this

Auto-generated from the video audio.