Skip to main content
Stesso

Apply Subsequent Coats and Touch-ups

5:15
8:37
85.1K views

At 5:15 in

Paint A Fireplace for $25. DIY Amazing Bronze Finish

Watch on YouTube

What happens here

Continue applying additional coats of the Stove Bright High Heat Paint until the desired color and coverage are achieved. The video mentions that three coats are typically sufficient to cover a flat black fireplace completely. For any remaining black spots or areas where metallic flakes need to be built up, apply spot treatments carefully. After addressing these spots, spray another full, light coat over the entire fireplace surface using the continuous, even spray technique as described in Step 3 to ensure a uniform finish. Always allow adequate drying time between coats.

Goal: Achieve full, even metallic coverage with multiple paint coats.

Tools and materials

  • Respirator — Protecting lungs from paint fumes
  • Spray Can Trigger — Providing better control and comfort during spraying

What they say

Hide

[Music] said a couple we're gonna black spots on here that I just got to build up the metallic flakes flakes on because the rest of the thing is completely coated yet those are still showing through so I'm just complete just coming back and keep the spot doing it and building it up over those black spots and then I'll go back over and do the whole thing with a proper pattern [Music] so if you ever used an airless sprayer before spraying with these cape spray heads is kind of a lot of the same principles you know try not to start and stop in the middle because in cases Sprague and spits try to find logical start and stops go from top to bottom or into end this is gonna be my second coat on this fireplace it's gonna take I've been coding all three of them three coats is enough to cover this fireplace it was flat black before and three coats is covering good enough just watch just spray it keeping a nice steady even smooth stroke as you're spraying

Auto-generated from the video audio.