Apply First Coat of High-Heat Spray Paint
At 1:40 in
Paint A Fireplace for $25. DIY Amazing Bronze Finish
What happens here
Once the surface is clean and dry, you are ready to apply the first coat of high-heat spray paint. Use Stove Bright High Heat Paint in Rich Brown Metallic for a bronze finish. Apply the paint in multiple light coats, as several thin layers will provide better coverage and reduce the risk of runs compared to one thick coat. Maintain good trigger control on the spray can and avoid moving too fast to prevent drips. If a run occurs, gently wipe it out immediately before it dries; otherwise, you'll need to sand it out later. Apply the paint in a logical pattern, such as from top to bottom or end to end, to avoid lap marks. Keep the trigger pressed down continuously while spraying a section to prevent spits or uneven coverage at start/stop points. Ensure you have enough paint to complete the entire section at once to avoid visible feathering or dry marks.
Goal: Apply an initial, even layer of metallic paint.
Tools and materials
- Respirator — Protecting lungs from paint fumes
- Spray Can Trigger — Providing better control and comfort during spraying
What they say
(1,031 characters)Hide
What they say
(1,031 characters)Auto-generated from the video audio.