Load Paint into Sprayer

1:56

5:45

275.6K views

At 1:56 in

Operating a Titan 440i airless sprayer. Airless Sprayer Instructions.

Watch on YouTube

What happens here

Carefully transfer the paint uptake hose from the clean water bucket to the 5-gallon bucket containing the paint. Ensure the prime hose remains submerged in the paint. Turn the prime knob to the 'down' position (prime mode) once again. Allow the sprayer to run until paint, rather than water, starts to flow consistently and without air bubbles from the prime tube. Once only paint is observed, flip the prime switch back up to the 'spray' position. The sprayer is now loaded with paint.

Goal: Fill the sprayer lines with paint.

Tools and materials

5-Gallon Bucket — Collecting purged water/paint mixture
Titan 440i Airless Sprayer Titan — The main painting apparatus

What they say

(488 characters)

Hide

uptake to the paint. So we're going to switch it over to the paint here. And then we're going to turn it the prime knob down. And you actually see paint coming out of the prime tube. Keep letting it run until you see paint come out. You'll see water initially. Now the paint start to come out. As soon as you see paint come out, you flip the prime switch back up into the up position. That's the spray position. And then your sprayer is now loaded with paint. Now you got your hose that's

Auto-generated from the video audio.