Skip to main content
Stesso

Plan and Cut Plywood Carcass

0:17
19:45
86.9K views

At 0:17 in

My Wife Wanted Fluted Wood Panels, I don't have a CNC.

Watch on YouTube

What happens here

Start by reviewing the design inspiration for the vanity, noting its double-sided nature and drawer-only configuration. Prepare a detailed cut list based on the project dimensions. Utilize two sheets of 3/4 inch maple plywood for the main cabinet carcass. Make initial rough cuts of the plywood using a track saw, ensuring manageable pieces. Follow up with precise finish cuts on a table saw, using a fine-tooth blade to achieve clean, accurate dimensions for all cabinet panels.

Goal: Begin by outlining the project plan and dimensions, then cut the 3/4 inch maple plywood into rough pieces with a track saw and refine with a table saw for precise cabinet carcass components.

Tools and materials

  • Ear Protection
  • Maple Plywood
  • Measuring Tape
  • Miter Saw
  • Pencil
  • Safety Glasses
  • Table Saw
  • Track Saw

What they say

Hide

see if I can replicate this exact one we're going to start working on it I got two sheets of maple plywood it's 3/4 in now why Maple plywood it paints and stains the best 80 bucks a sheet I got two of those sheets uh I think it's going to be enough to make the carcass of it highly encourage you guys to sit down and at least write down your cut list that way you'll have better momentum as you're building this thing so I'm going to start slicing this down rough cuts on the on the tracks saw and then the finishing Cuts I like to do on the table saw with a nicer blade so it's all consistent we got the rough stuff

Auto-generated from the video audio.