Craft and Attach Custom Legs

go for the legs I picked up this 2x2 piece of Oak um at lows it's 36 in pricey it's like 27 bucks but I don't have to go Mill any kind of wood so the legs I want them to kind of taper if you want to call it from the top and then go down obviously I can't do that here cuz I want this to be the finishing product I need to give it a little girth there so I what I'm going to do is i' I've crunched down the numbers I want it to be 4 in tall so I'm going to cut this into even blocks and then glue a couple of pieces together once they're glued I'll use my band saw to create that radius [Music] I let these legs dry overnight so now we need to create a little subtle radius I just took a a nice big bucket here that we're going to lay down here and I'm going to use my Sharpie to trace and we'll bring it over to the band side to get a nice good radius [Music] we got them cut we got them rounded over and finally sanded to 220 I'm going to glue them on right here clamp it in put a couple of pilot holes in to make sure nothing has issues Drilling in and then I'll put two screws per one each one and then we're going to have one in the front one in the back on each side and then I'll put one down the middle to kind of give it that weight so it doesn't tip over the vanity is looking great it's done the legs are on perfect