Apply First Coat to Door Back
0:05
0:53
741.2K views
At 0:05 in
My door spraying setup from PaintLine. #painter #innovation #toolsofthetrade #paintline
What happens here
After painting the first side and its edges, the door is rotated again on the PaintLine PSDRID system to expose the second main surface (the back). The painter repeats the spraying technique, applying the first coat of semi-gloss urethane enamel to this side, ensuring all areas, including the recessed panels, receive an even and consistent layer of paint. The previously filled dents with Bondo glazing putty are still somewhat visible at this stage but are covered by the paint.
Goal: Apply an even first coat of paint to the back surface of the door.
Tools and materials
- Airless Spray Gun — Applying paint to the door back
- PaintLine PSDRID — Rotating the door for painting the back side
- Protective Gloves — Protecting hands from paint
- TriTech 510 FF Tip TriTech — Ensuring a fine, smooth finish
- Bondo Glazing Putty — Filling dents and imperfections
- Semi-gloss Urethane Enamel Paint — Coating the door back