Skip to main content
Stesso

Apply FrogTape Border to Window Pane

0:59
7:33
307.8K views

At 0:59 in

Masking Windows Fast. How to use a painters hand masker. How to mask windows.

Watch on YouTube

What happens here

Begin by applying FrogTape along the top edge of a window pane, extending the tape slightly beyond the left and right sides of the glass (approximately 1 inch on each side). Repeat this process for the bottom edge, again extending the tape beyond the glass. Next, apply FrogTape along the left side, allowing it to overlap the extended portions of the top and bottom tape. Do the same for the right side. The goal is to create a clean, precise border around the glass, allowing for neat trimming later. Press all tape firmly onto the glass to prevent any paint from seeping underneath.

Goal: Create a precise, sealed border around the window glass with FrogTape.

Tools and materials

  • FrogTape FrogTape — Creating the primary, no-bleed border directly on the glass

What they say

Hide

about masking these windows. So you're going to just take your tape and you're just going to extend it beyond the actual glass portion of the window. Just like that. And you're not going to worry about it being extended too far. The next run is going to just start right there and extend beyond. And that run doesn't extend beyond. You can make it extend beyond the glass if you want, but I'm going to try to save the amount of cuts I have to make with my blade by just extended only half of the pieces of tape. So, just like that. Once you get it set on there on the glass,

Auto-generated from the video audio.