Skip to main content
Stesso

Understand Framing Components

0:00
2:59
15.1M views

At 0:00 in

Learn window and flashing installation. Learn how to keep the water out💪 #window #flashing #learn

Watch on YouTube

What happens here

The video begins by explaining the basic framing components for a window opening: the header and the rough sill. The header is shown supporting the loads from above and distributing the weight down and around the opening. The rough sill is explained to bear only the weight of the window. A demonstration shows how the rough sill can be pitched at a 5-degree angle for drainage, though it's not strictly necessary. The importance of these structural elements for proper load bearing and window support is highlighted.

Goal: Familiarize with structural framing for a window opening (header, rough sill).

Tools and materials

  • Framing Square — Demonstrating the 5-degree angle for the rough sill
  • Rough Sill N/A — Structural support at the bottom of the window opening
  • Window Header N/A — Structural support above the window opening to transfer loads

What they say

Hide

Before a window gets installed, you'll need to install a header. This header takes the loads from above and distributes the weight down and around this opening. This allows our rough sill to bear only the weight of the window. This can get pitched to a 5° angle, but doesn't have to be. And then sheathing. This window is labeled 24 in by 24 in, so our rough opening will be those measurements, even though our window measurement is a 1/4 in short. This is for new construction windows and flanged

Auto-generated from the video audio.