Skip to main content
Stesso

Reinforce Pan Flashing Corners

1:19
2:59
15.1M views

At 1:19 in

Learn window and flashing installation. Learn how to keep the water out💪 #window #flashing #learn

Watch on YouTube

What happens here

Cut two separate pieces of flashing tape to cover the lower corners of the pan flashing. These corner pieces should be applied such that they overlap the pan flashing from bottom to top, ensuring that water can flow downwards without penetrating. This reinforces the corner seals and integrates the pan flashing with the side WRB.

Goal: Seal the lower corners of the pan flashing for enhanced water protection.

Tools and materials

  • Flashing Tape Vycor Plus — Sealing the pan flashing corners
  • Utility Knife N/A — Cutting the flashing tape
  • Water Sprayer N/A — Demonstrating water flow

What they say

Hide

Now you can cut out your corners. Add additional layers if you still need to cover your sill. Depending on the manufacturer, you might need butyl tape instead of asphalt tape. Then two pieces for your corners. Remember to overlap from the bottom to the top. This allows water to flow down like this compared to if it's on the top, water can flow down and potentially trap water. Now I'll add a bead of sealant. I like to put this on decent right below the nailing. It's a great idea to put sealant on the top and the sides of a window. You never want to

Auto-generated from the video audio.