Skip to main content
Stesso

Cut and Install Knee Braces

1:03
1:30
23.5K views

At 1:03 in

Knee bracing explained

Watch on YouTube

What happens here

After calculating the length, the knee brace needs to be cut. The presenter states that the brace should be cut to 17 inches, and the cuts at each end should be 'outside of 45 to outside of 45'. This implies cutting 45-degree bevels on both ends of the brace, ensuring it sits flush against both the post and the beam. Although the actual cutting process is not shown, the resulting cut brace is shown and then fitted into place. The presenter takes one of the pre-cut 17-inch wooden braces, positions it between the post and beam, and then secures it. The video shows the finished structure with two knee braces installed, demonstrating its increased rigidity and stability.

Goal: Securely attach knee braces to the post and beam structure.

Tools and materials

  • Drill/Driver Unspecified — Driving screws or pre-drilling for bolts/nails
  • Fasteners Unspecified — Securing the braces to the post and beam
  • Knee Brace Lumber Unspecified — The wood for the knee braces
  • Safety Glasses Unspecified — Eye protection during cutting and fastening
  • Saw Unspecified — Cutting the lumber to the correct length and angle

What they say

Hide

ahead and cut your bracing at 17 in. When cutting your 17 in brace, you want to go outside of 45 to outside of 45. So, if we measure this here, 17. Let's screw it in. Now, look at that. Nice and rigid. That's why triangles are everywhere in construction. Whether it's shelves, pergolas, decks, or post and beam framing, triangles are everywhere. That's it for triangle Tuesday. I got stuff to do. I'll catch you guys on the next one. Peace.

Auto-generated from the video audio.