Skip to main content
Stesso

Install P-Trap

3:34
5:49
71.3K views

At 3:34 in

Kitchen Sink Leak...How to Replace Drain Pipe

Watch on YouTube

What happens here

Attach the new P-trap to the sink drain and the J-tube, using the provided washers and nuts. Ensure the beveled side of the washers faces the drain and J-tube. Hand-tighten all nuts.

Goal: Connect the new P-trap to the sink drain and J-tube.

Tools and materials

  • Nut — Securing the P-trap to the sink drain and J-tube
  • P-Trap — Creating a water seal to prevent sewer gases from entering the home
  • Washer — Sealing the connections between the P-trap, sink drain, and J-tube

What they say

Hide

tighten it down yet and we'll just get a measurement on where our p-traps gonna go which that actually worked out really well one more knot in washer remember the bevel side actually is going to go down in to this bevel right here so you can see that that actually that bevel is going to fit right down into that piece so we just pop that on here bullets and so this Jay to piece this Jay to piece right here it's kind of got a built in washer already right and you just want to make sure that that's down in there and it's setting even and then just screw in place okay now we'll tighten up all these nuts and we'll give it a test okay so there we go we're

Auto-generated from the video audio.