Install J-Tube

up swapped out and we'll put it back together okay so since we have it we're just going to take the p-trap off as well and we'll replace that cuz it all comes in a kit so you get the p-trap the J tube and two new washers with two new nuts in a cave so Simmons to install this you just take one of the nuts and put it this way because it's going to connect to the p-trap like that will take the block not with the washer and we'll put this to where it's going to connect back here to the ABS and whatever you install these just make sure if there's a babble on it just make sure the bevel is going to go to the piece that you're hooking up so the opposite side of the nut is where the bevel goes and so then we'll just put this right back in here and don't tighten it down yet and we'll just get a