Apply Acid to Concrete Floor
At 2:49 in
Instructions & Tutorials Preparing Concrete For Epoxy. Acid Etching Hacks.
What happens here
Once the acid solution is mixed, the pump sprayer is pressurized by pumping the handle. The acid solution is then applied to the concrete floor, starting from one corner and working across the garage. The presenter emphasizes working methodically to cover the entire area evenly. As the acid reacts with the concrete, it will turn yellow and produce a fizzing action, indicating that it is actively etching the surface. The goal is to achieve a texture similar to 100-grit sandpaper, which can be tested by rubbing one's feet or hand on the surface. If any oil or dirt spots are present, apply more acid to those areas until the reaction occurs.
Goal: Etch the concrete to a rough, porous finish.
Tools and materials
- Eye Protection — Protection from acid splashes
- Plastic Pump Sprayer — Spraying the muriatic acid onto the concrete
- Respirator with Acid-Grade Filters — Protection from acid fumes
- Rubber Boots — Protection from acid
- Rubber Gloves — Protection from acid contact
What they say
(814 characters)Hide
What they say
(814 characters)Auto-generated from the video audio.