Skip to main content
Stesso

Spray Narrow Passageways and Obstacles

10:31
12:40
377.5K views

At 10:31 in

How To Spray A House With A Paint Sprayer. House Painting Instructions. home improvement painting

Watch on YouTube

What happens here

When painting in challenging areas, such as narrow passageways between a house and a fence, where you need to continuously move with the sprayer, use a cardboard shield to protect the adjacent fence from overspray. Walk a consistent pace, allowing the spray gun to move with you from one logical start/stop point to the next. For small obstacles like outdoor outlets on the siding, it is advisable to spray them first. Coating outlets with paint protects them from UV rays and prevents oxidation. Once the obstacle is sprayed, you can then proceed to paint the surrounding siding, making sure to blend the areas seamlessly.

Goal: Effectively spray challenging areas with limited space or obstructions.

Tools and materials

  • Airless sprayer — Applying paint to siding and obstacles
  • Cardboard shield Trimaco — Protecting adjacent surfaces like fences from overspray
  • Spray gun extension — Allowing better reach and control in confined spaces

What they say

Hide

never actually thin my paints. So, I'm going to be going over another scenario painting the siding. Got another house right here. This is a different house, but I've got a scenario here where I've got my start and stop points where they're a longer distance. And I'll show you cuz I can't reach with my gun without walking. So, I'm going to show you what it looks like to actually spray it with uh walking the distance from end to end. And I've got footings right down here also that I'm going to be using my cardboard shield on. And I'll show you what that looks like, too. Now, now I got this footing sprayed. Now I'm going to begin spraying my field right here in to end. So now I got a an outlet right here that's on the outside of the home. And we typically spray those outlets. it's all oxidized. I like to spray them because then it actually protects the outlet and it protects it from the UV rays and it won't oxidize anymore. So, I'll just work around that outlet first. And now I'll begin spraying the field. And my logical start and stops is going to be this piece of trim board and the other piece of trim board. There you go. That's what it looks like to spray a longer distance where you actually have to walk from your logical start and stop points. So that's it for

Auto-generated from the video audio.